Hydroproof is a single-component acrylic polymer designed for cement-based waterproof composite coating membranes.
When mixed with cement, it forms a tough, impermeable waterproof layer that protects concrete and masonry surfaces from water ingress and environmental exposure.
Suitable for brush application on both horizontal and vertical surfaces, Hydroproof provides an effective and economical waterproofing solution for residential and commercial projects.

Product Highlights

--------------------------------------------------------

• Type: Acrylic Polymer for Cement-Based Waterproofing
• Form: Liquid
• Application Method: Brush application (mixed with cement)
• Features:

• • Non-toxic, non-flammable and user friendly

  • Forms a tough, impermeable waterproof membrane

  • Excellent adhesion to concrete and masonry

  • Suitable for horizontal and vertical surfaces

  • Protects against wind, rain and sunlight

  • Breathable membrane allows internal water vapour to escape

  • Economical and effective waterproofing solution

• Properties:

• • Water absorption: Max. 1%

  • Pot life at 30°C: Approx. 30 minutes

  • Application temperature: Not less than 10°C

  • Bond strength to concrete: Approx. 1 N/mm²

  • Toxicity: Non-toxic

• Areas of Application:

• • Roofs, terraces and balconies (below sloping screed or waterproof plaster as sandwich layer)

  • Pools and fountains

  • Reservoirs and channels

  • End walls exposed to rain

• Application Instructions
• Surface Preparation:

• • Clean surface thoroughly using wire brush or mechanical means

  • Remove dust, laitance, oil, grease and contaminants

  • Repair spalled or damaged concrete before coating

• Topcoat Mix Ratio:

• • 1 part Hydroproof

  • 2 parts neat cement

• Mix using low-speed drill with paddle; do not mix for more than 2 minutes.
  Do not mix more material than can be used within pot life.
  Do not retemper with water. Stir occasionally during application to prevent settlement.